Technical guide · Formulation
Creatine solubility and stability: the formulation guide.
Purity, particle size, dissolution and storage stability answer different questions. Use them together to choose an ingredient for powders, sachets or heat-treated beverages.
A sound creatine selection brings dissolution behaviour together with processing and storage stability. Assess how much dissolves, under which conditions, and how much creatine remains after processing and storage within the same technical framework.
Four measurements, four decisions.
| Measurement | Question | Required context |
|---|---|---|
| Purity | How much of the specified material is present? | Specification and batch assay |
| Dissolution | How quickly does material enter solution? | Time, mixing and particle-size conditions |
| Solubility | How much is dissolved under defined conditions? | Concentration, temperature, pH and method |
| Stability | How much creatine remains over time? | Starting assay, processing and storage results |
What do micronised and 200 mesh mean?
Micronised describes particle-size reduction. A mesh designation describes a sieve. In the US standard sieve series, No. 200 has a nominal opening of 75 µm; the product specification must also define the passing percentage. Neither term alone establishes purity, equilibrium solubility or a clinical outcome.
Review the 200 mesh ingredient profile.
AOAC INTERNATIONAL · Definition of Terms and Explanatory Notes, Table 1.
What should a water-solubility claim include?
Ask for the amount tested, liquid volume, temperature, pH, mixing time and the method used to separate dissolved from undissolved material. Defined conditions turn a solubility percentage into useful comparative information for your formulation.
Published formulation research measures dissolution, crystallisation and chemical stability separately. These distinctions are useful when comparing a freshly prepared powder drink with a product stored in liquid form.
Ganguly et al., 2003 · AAPS PharmSciTech · doi:10.1208/pt040225
How should you read stability results?
Start with the ingredient, batch and assay basis. Then compare the starting and final results within that same material. For example, CreaStab’s reported heat-test assay changes from 58.85 to 56.35: retention is 56.35 / 58.85 × 100 = 95.75%. The 2.50 percentage-point difference is not a 2.50% relative loss.
Plan a pasteurisation study around the finished formula.
Document the target active content, pH, heat-up and holding times, cooling, order of ingredient addition and packaging. Assess creatine after processing and through the proposed shelf life, alongside physical and microbiological quality. An ingredient heat challenge and powder-storage study answer only part of this question.
We use these inputs to plan sample assessment, analytical requirements and the technical dossier with your manufacturing team.
Common questions
What do purity and water solubility tell you together?
Purity describes ingredient composition, while solubility describes the amount dissolved under defined conditions. Assessing both helps you select the ingredient for your product.
How is 200 mesh assessed for a beverage project?
The sieve grade defines physical fineness. We assess beverage clarity, settling and storage behaviour alongside pH, concentration and co-ingredients to evaluate the complete formulation.
Which ingredient should I assess for a pasteurised product?
CreaStab is the stability-focused option in this portfolio. Its reported heat and pH data inform development; the intended finished product requires validation under its own process conditions.
Explore the range
Let’s develop your next formula.
Share your product format, target market, processing conditions and estimated annual demand. We will plan technical documentation, samples and supply around your project.